Printmaking is the process of making artworks Traditional media for visual works of art include: calligraphy, photography, carvings, gardens, ceramics, painting, prints, sculpture, drawings, photography or buildings. Since modernism, the field of fine art has expanded to include film, performance art, conceptual art, Welded sculpture and video art by printing Printing is a process for reproducing text and image, typically with ink on paper using a printing press. It is often carried out as a large-scale industrial process, and is an essential part of publishing and transaction printing, normally on paper Paper is a thin material mainly used for writing upon, printing upon or for packaging. It is produced by pressing together moist fibers, typically cellulose pulp derived from wood, rags or grasses, and drying them into flexible sheets. Printmaking normally covers only the process of creating prints with an element of originality, rather than just being a photographic reproduction of a painting. Except in the case of monotyping Monotyping is a type of printmaking made by drawing or painting on a smooth, non-absorbent surface. The surface, or matrix, was historically a copper etching plate, but in contemporary work it can vary from zinc or glass to acrylic glass. The image is then transferred onto a sheet of paper by pressing the two together, usually using a printing-, the process is capable of producing multiples of the same piece, which is called a 'print'. Each piece produced is not a copy but considered 'an original' since it is not a reproduction of another work of art and is technically (more correctly) known as an 'impression'. Printmaking (other than monotyping) is not chosen only for its ability to produce multiple copies, but rather for the unique qualities that each of the printmaking processes lends itself to.
Prints are created from a single original surface, known technically as a matrix In hot metal typesetting, a matrix is a mould for casting the letters known as sorts used in letterpress printing. Common types of matrices include: plates of metal, usually copper or zinc for engraving Engraving is the practice of incising a design on to a hard, usually flat surface, by cutting grooves into it. The result may be a decorated object in itself, as when silver, gold, steel, or glass are engraved, or may provide an intaglio printing plate, of copper or another metal, for printing images on paper as prints or illustrations; these or etching Etching is the process of using strong acid or mordant to cut into the unprotected parts of a metal surface to create a design in intaglio in the metal . As an intaglio method of printmaking it is, along with engraving, the most important technique for old master prints, and remains widely used today; stone, used for lithography Lithography is a method for printing using a stone (lithographic limestone) or a metal plate with a completely smooth surface. Lithography originally used oil or fat. However, in modern times, the image is now made of polymer applied to anodized aluminium plates. The smooth surface is divided into (1) hydrophilic regions that accept a film or; blocks of wood for woodcuts Woodcut — formally known as xylography — is a relief printing artistic technique in printmaking in which an image is carved into the surface of a block of wood, with the printing parts remaining level with the surface while the non-printing parts are removed, typically with gouges. The areas to show 'white' are cut away with a knife or chisel,, linoleum for linocuts Linocut is a printmaking technique, a variant of woodcut in which a sheet of linoleum is used for the relief surface. A design is cut into the linoleum surface with a sharp knife, V-shaped chisel or gouge, with the raised (uncarved) areas representing a reversal (mirror image) of the parts to show printed. The cut areas can then be pulled from the and fabric plates for screen-printing Screen printing is a printing technique that uses a woven mesh to support an ink-blocking stencil. The attached stencil forms open areas of mesh that transfer ink as a sharp-edged image onto a substrate. A roller or squeegee is moved across the screen stencil, forcing or pumping ink past the threads of the woven mesh in the open areas. But there are many other kinds of matrix substrates and related processes discussed below.
Works printed from a single plate create an edition In printmaking, an edition is a number of prints struck from one plate, usually at the same time. This is the meaning covered by this article. This may be a limited edition, with a fixed number of impressions produced on the understanding that no further impressions will be produced later, or an open edition limited only by the number that can be, in modern times usually each signed and numbered to form a limited edition In printmaking, an edition is a number of prints struck from one plate, usually at the same time. This is the meaning covered by this article. This may be a limited edition, with a fixed number of impressions produced on the understanding that no further impressions will be produced later, or an open edition limited only by the number that can be. Prints may also be published in book form, as artist's books Artists' books are works of art realized in the form of a book. They are often published in small editions, though sometimes they are produced as one-of-a-kind objects referred to as "uniques". A single print could be the product of one or multiple techniques.
